Your chiller plant runs 24/7. So do your energy costs and emissions.
Hotels, hospitals, nursing homes and large institutions depend on constant cooling. But many still rely on fixed-schedule chillers, fragmented controls and limited real-time visibility — creating high operating costs, avoidable emissions and exposure to volatile electricity prices.
Cooling is expensive, constant and carbon-heavy.
For buildings that never stop, producing cooling is one of the largest operating costs and one of the biggest sources of emissions.
Cooling share of A/C energy
Share of a building's electricity bill that can be driven by air conditioning.
Typical chiller load share
Typical chiller share of commercial A/C energy use — the single biggest controllable load.
Target cooling savings
Cooling kWh savings achievable from adaptive, AI-led chiller optimisation.
Potential emissions reduction
Lower cooling-driven CO₂ emissions from the same AI optimisation, measured against a baseline.
Figures are indicative and vary by site size, fuel source, climate, operating profile and electricity mix. Site-specific savings are confirmed through an energy assessment. Sources available on request.
Round-the-clock demand, met by fixed-schedule chillers.
Complex buildings can't turn the cooling off. Guests, patients and residents need reliable cool air every hour of every day, so the chiller plant runs continuously, often on fixed schedules, over-cautious setpoints and limited visibility or control.
The result is wasted electricity, high peak-demand charges and emissions that are hard to measure, let alone reduce.

The legacy chiller plant
Fixed schedules and fragmented controls create waste, high costs and CO₂ emissions.
- Fixed schedules running 24/7 to guarantee comfort
- Reactive maintenance and little real-time visibility
- High exposure to peak electricity demand charges
- Emissions that are difficult to track or verify
No mechanical replacement needed — Dotz ChillerAI adds sensors, metering and AI control to the chiller plant you already run.
From an unmanaged cost centre to a measured, optimised system.
The buildings that carry the heaviest cooling loads.
The same continuous-demand profile shows up across the most energy-intensive building types — exactly where AI-led optimisation has the most to give back.
Primary focus
Hotels & resorts
Hospitals & healthcare
Nursing homes
Also relevant
Large residential complexes
Large office buildings
Data centers
Shopping centres
Institutional & industrial sites
There is a better way to run your chiller plant.
Dotz ChillerAI turns the chiller plant you already run into a measured, AI-optimised, lower-carbon system — funded from the savings it creates. No major upfront capital.
